0102030405
High Precision Frictional Mid-Speed Cutter for Plastic Films - China Suppliers and Factory
Main configuration characteristics
- This machine adopt left/right pneumatic shaft interlace center rolling mode, suitable for multi-strip cutting.
- Main machine adjusts speed with variable frequency, main rubber transmission with constant speed, which makes the cutting speed constantly.
- With function of auto count meter for length, auto halt at certain lenath.
- With anvil blade and blower for rim charge.
- Unreeling adopts magnetic actuator with tension control.
- Unreeling material adopts auto loading equipment.
- With Photoelectric correction system, which can cutting precisely by tracing the brim of raw material.
Technical parameters
| Parameter Item | Specification / Value |
|---|---|
| The speed of the machine | 5-380m/min |
| Rewinding diameter | φ800mm |
| Machine width | 650-2500mm |
| Slitting width | 20-2500mm |
| Rewinding diameter | φ500mm |
| Correction | photoelectric tracking / with edge or tracking |
| Tension control | the constant tension control of magnetic powder |
| Total power | 2.2-8.5Kw |
Frequently Asked Questions
What is the maximum operating speed of this slitting machine?
The machine operates at a speed range of 5 to 380 meters per minute, which is regulated by variable frequency control to maintain constant cutting speeds.
What are the raw material width and slitting width capabilities?
The machine supports raw material widths ranging from 650mm to 2500mm, and it can perform precision slitting widths from 20mm up to 2500mm.
How does the correction system ensure cutting accuracy?
It utilizes a Photoelectric correction system that precisely traces the brim or edge of the raw material to guide the cutting process accurately.
What type of tension control system is used?
The unreeling process uses a magnetic actuator combined with constant tension control of magnetic powder to ensure stable material feed.
Does the machine support automatic measurement and halting?
Yes, the machine features an automatic length counting meter function and is programmed to halt automatically when it reaches a pre-set length.
What are the rewinding diameter specifications?
Depending on the configuration parameters, the system supports rewinding diameters of φ500mm and up to φ800mm.